+86 181 6720 3527
+86 181 6720 3527
Product Category
Pot Magnets
Pot magnets (cup magnets) are a robust magnetic assembly consisting of a permanent magnet core (neodymium NdFeB, ferrite, SmCo or Alnico) enclosed in a precision steel pot. The steel casing concentrates magnetic force to one side, boosts holding power, protects the magnet from impact & chipping, and enables easy mounting. Ideal for metal-surface fixing without drilling or damage.
JESTAR is a professional pot magnet supplier and pot magnet manufacturer specializing in the design, production and global supply of high-quality magnetic assemblies. Backed by advanced manufacturing facilities, strict quality control and extensive OEM experience, we provide reliable pot magnets for industrial, commercial and engineering applications.
From standard products to custom pot magnet solutions, our team works closely with distributors, importers, wholesalers and equipment manufacturers to deliver products that meet specific technical and application requirements. Whether you need a wholesale pot magnet order or an OEM pot magnet project with customized dimensions, magnetic strength, mounting structures or branding, JESTAR offers dependable manufacturing capabilities and competitive factory pricing.
The basic structure of pot magnets includes a permanent magnet, a steel casing, and a spacer. The steel casing does more than protect the magnetic element from chipping or cracking upon contact with a hard surface; it also plays an important role in the magnetic circuit.
Because the steel casing has much higher magnetic permeability than air, it helps channel and concentrate the magnetic flux toward the open working surface while reducing magnetic leakage. As a result, the magnetic flux follows a more efficient path than it would in a simple bare magnet.
When pot magnets are attached to a ferromagnetic workpiece, a more complete magnetic circuit is formed. This allows them to generate a stronger holding force than ordinary magnets of comparable size, especially when they are in direct contact with the workpiece.
Pot magnets can be classified in different ways, including by mounting design, accessory configuration, or the type of magnetic material used inside the steel casing. In practical product presentation, however, classification by magnetic material is often the most straightforward starting point, because the magnetic material largely determines the holding strength, temperature capability, and cost level of the pot magnet.
Common magnetic materials used in pot magnets include Neodymium, ferrite, Samarium Cobalt, and AlNiCo. Among them, Neodymium pot magnets offer the highest strength-to-size ratio and are widely used where strong holding force is required in a compact assembly. Ferrite pot magnets provide a more economical option for general holding applications. Samarium Cobalt pot magnets are better suited to elevated-temperature environments, while AlNiCo pot magnets can also be used in certain high-temperature designs.
Besides magnetic material, pot magnets are also available in a wide range of mounting forms, such as countersunk, threaded, hook, and eyelet types. These structural differences affect how the magnet is installed and used in practice. In many cases, the mounting form is just as important as the magnetic material when selecting the right pot magnet for the application.
Extreme Holding Force: Focused magnetic circuit delivers superior pull in a compact size
Durable Protection: Steel housing resists impact, abrasion & breakage
Easy Installation: Threaded hole, countersink, eyebolt or adhesive mounting options
Wide Compatibility: Neodymium (high strength), ferrite (cost-effective), SmCo (high temp) grades
Versatile Design: Shallow pot, deep pot, rubber-coated, tapped, countersunk, with hook or bolt
Cost-Efficient: Long service life, maintenance-free, reusable holding solution
Material: Neodymium (NdFeB) N35–N52 / Ferrite / SmCo
Housing: Mild steel, nickel-plated for corrosion resistance
Holding Force: 5kg–2000kg (custom on request)
Sizes: Diameter 10mm–100mm; height 5mm–50mm
Mounting: Internal thread M3–M16, countersunk hole, eyebolt, plain base
Coating: Nickel (standard), zinc, rubber boot (anti-scratch & anti-slip)
Operating Temp: Up to 80°C (neodymium); 350°C (SmCo)
Custom: Drawings & samples accepted; OEM & ODM supported
Pot magnets are typically rated by pull force, which may also be referred to as holding force, adhesive force, clamping force, or breakaway force. This value represents the maximum force required to detach the pot magnet from a thick, flat, clean mild steel plate under ideal test conditions. In practice, however, the actual holding performance depends not only on the pot magnet itself, but also on the working conditions in which it is used.
One of the most important factors is the air gap. Any non-magnetic material between the pot magnet and the ferromagnetic workpiece, such as paint, plastic, paper, rubber, dirt, rust, or scale, can weaken the magnetic circuit and reduce the pull force significantly. The thickness, flatness, and magnetic permeability of the contact surface also matter. If the steel plate is too thin, uneven, or magnetically weak, the rated pull force may not be achieved in actual use.
Temperature is another important factor. As the operating temperature rises, the magnetic performance of the pot magnet may decline depending on the magnetic material and assembly design. For this reason, the catalog pull force should be understood as a reference value rather than a universal working load. In practical applications, especially where safety is involved, an appropriate safety margin should always be built into the design.
Choosing the right pot magnet requires a combination of factors rather than a single pull force figure. In practical applications, the mounting form, contact surface condition, working direction, operating temperature, and safety requirements should all be considered together.
Standard products can cover many common needs, but in some cases the application may require adjustments in size, pull force, thread type, or mounting structure. For more reliable selection, it is often better to evaluate the actual working conditions together with the drawing or product design rather than relying only on catalog data.
If you are selecting pot magnets for a specific application, feel free to send us your drawing or requirements for evaluation. Based on the mounting method, working surface, and operating conditions, we can help identify a more suitable pot magnet solution.
In addition to our standard product range, JESTAR provides flexible custom pot magnet and OEM pot magnet services for customers with specialized application requirements. We can customize magnet material, pull force, dimensions, mounting type, coatings, threaded structures and packaging according to your drawings or technical specifications.
As an experienced pot magnet manufacturer, we support private label branding, logo marking and customized packaging for distributors and wholesalers worldwide. Whether you require prototype development, small-batch production or large-scale wholesale pot magnet orders, our engineering and production teams are committed to delivering reliable quality, stable supply and responsive technical support throughout your project.
Hot Products
Wholesale bypass pruners with sharp blades and ergonomic design, perfect for clean cuts in gardening and professional use.
